I decided to retake Shibuya video using new Zhiyun Crane V2 because I got many issues with Beholder DS1 last time. I tried to walk more slow and included full street musician performance at 37:00. New gimbal default settings are a bit hard to use but I did some adjustments for next videos. Any suggestions for new videos place and time are welcome. Formatted text explanation here https://rambalac-en.blogspot.com/2017/07/testing-new-zhiyun-crane-v2-zhiyun.html Zhiyun Crane V2 advantage: 1. Noiseless. 2. Used for 1.5 hours and still had 4/4 (4 blinks) without any issue like noise or vibration. 3. Indicator is not the best, but at least visible. 4. 360 deg. 5. No drift noticed so far. 6. Batteries are simply inserted into handle. 7. Bluetooth remote control. 8. Camera rec/stop control from gimbal. Not big deal but useful. 9. Can be used with quick plate. 10. 1/4" bottom mount. Beholder DS1 issues: 1. Noisy. Can be partially fixed by tuning settings, but noise returns and it gets some stabilization issues after less than 1 hour when battery level drops (EC1 ?). 2. That means battery life is 1 hour. 3. Battery indicator is on opposite side of handle and cannot be seen while shooting (fixed in EC1). 4. Not 360 deg (fixed in EC1) 5. Drifting. While in fallowing mode it does not return always to the same position. After some time pan direction gets off center and I have to correct it with joystick (EC1 ?). Because it's not 360 deg gimbal it hits pan limiter after some time without adjusting. 6. Battery replacing is complicated and time consuming because of special battery clip (Same for EC1). 7. No Bluetooth remote control (Same for EC1). As I often use gimbal on monopod over crowd heads it's very hard to adjust frame without remote control. DS1 cable is ugly, especially if I have to change monopod length often. 8. Balance adjustment is not enough for camera on quick plate. 3/8" screw bottom mount requires 1/4" adapter which makes monopod mount a bit shaky. Zhiyun Crane V2 issues or Zhiyun Crane V2 vs Beholder DS1: 1. Zhiyun Crane V2 default settings hard to use. Compensation is too hard and so small pan or pitch shaking is visible. I tried to change settings, but need to retest. 2. Zhiyun Crane V2 with default firmware in full follow mode (following both pan and pitch) you cannot adjust pan or pitch from joystick, but it has useless roll. 3. Zhiyun web site is just slow useless crap. Just to get to download section it can take 5 min. impossible to download anything because spead is several BYTES per second and it fails anyway. Fortunately mobile app is in Google Play, unfortunately firmware update is not working there. 4. Zhiyun Crane is using proprietary software, so together with unusable website it means unlikely that any issues like full following mode will be fixed. Beholder's software is common and opensource. 5. Huge camera mount plate hits pan motor in some angles. 6. After balancing camera Zhiyun Crane V2 cannot be folded flat as pitch motor hits pan motor. Filmed in UltraHD 4K with Lumix GH4 camera and Zhiyun Crane V2 stabilizer. Feel free to correct my English or suggest a video to film.